Call an expert
+44 161 622 0777
Use a form
Chat to an expert

Neptune MP Mechanical Batching System

Neptune MP is a fully mechanical liquid Batching System with is easy to install, requires no power supply and is ideal for use with hazardous ATEX zoned area. The Type MP Oscillating Piston Flowmeter provides high accuracy industrial liquids flow measurement. Neptune’s MP Series of Flowmeters has proven reliable through years of measuring over 400 common industrial liquids.

The Type MP is available in:

  • 1 inch – Cast Iron, Stainless Steel
  • 2 Inch – Cast Iron, Stainless Steel

Industry: Chemical, Food, Beverage/Bottling, Paint and Coatings, Printing, Lawn Care, Adhesives, Dairy, Plastics, Dry Cleaning, Cosmetics, Textiles, Distillery, Canning, Animal Feed, Paper Mill

Type MP Meter Features:

  • Magnetic Drive eliminates stuffing box leaks
  • Insensitive to moderate changes in viscosity
  • 100% mechanical batching capability… no external power source required
  • Variety of piston materials available to suit fluid and temperature conditions
  • Minimal Maintenance – one moving part in flow stream
  • Broad range of available accessories… pulsers, registers, valves
  • Maincase easily opened for cleaning

When combined with the 842 preset register and mechanical, auto-stop valve the MP Flowmeter becomes a robust and reliable mechanical batching system – ideal for hazardous environments.

Utilising the Oscillating Piston principle the Neptune MP Flowmeter provides high accuracy measurement for a wide range of industrial liquids and is ideal for use in chemical processing, Bio Diesel, paints &coatings, cosmetics, pharmaceuticals, pesticides and additives industries. Close tolerance machining combined with a minimum number of moving parts makes the MP insensitive to moderate changes in liquid viscosities.

Fully Mechanical Batch Control:

The Neptune MP flowmeter offers total mechanical batch control. When used with an 842 register and its mechanical auto-stop valve the unit becomes a fully mechanical, self sufficient batching system. No outside power sources are required. Auto-Stop valves allow the operator to set the register for the desired quantity. The flow will shut off automatically at the exact volume desired. Auto-Stop valves are easy to maintain, reliable and handle a wide range of products. Controlled valve closing, available with the two-stage auto-stop valve, reduces the potential for hydraulic shock on both the dispensing lines and the flowmeter itself.

Electromechanical Batch Control:

The MP flowmeter can be used without the mechanical auto-stop, instead replacing this with an auto switch enables a remote valve (pneumatic or electronic) to be operated by the mechanical batching register. As with the mechanical system the operator simply sets the desired batch quantity on the register and on reaching the exact volume desired will switch off the pump and / or switch a valve. The auto switch has two switch contacts for switching a pump and a valve for example or to provide two stage valve closure. The auto switch can be ordered for either electronic or pneumatic switching – both of which are fully ATEX certified.

  • No straight pipe length requirements
  • 100% Mechanical Batching – ideal for hazardous areas
  • No Power Supply Requirements
  • Complete batch System – Stand Alone with no wiring or need for ancillary equipment
  • Fitted with change gears for positive calibration
  • Flowmeter sizes 1” to 3”
  • Flow Rates 26 to 1140 Lts/min
  • Integral Air Release & Strainer option