ST-F126EG Flow Computer with Temperature & Pressure Compensation +Analog Output For Gas Correction
The ST-F126-EG flow computer has been developed to calculate corrected gas volume at
normal conditions. The corrected volumetric flow is calculated by measuring the uncorrected
volumetric flow, actual line temperature and pressure which are processed with the equations
stored in the flow computer. A compressibility factor can be set to approach a real gas
behaviour. The reference conditions can be defined as desired (e.g. 15°C or 60°F and 1.013
bar). The display shows the compensated flow rate, total, accumulated total and the actual
line temperature and pressure. On-screen engineering units like Nm³ are easily configured
from a comprehensive selection. A wide range of options further enhance this models
capabilities, including Intrinsic Safety for hazardous area applications and full Modbus
communication.
-
Displays actual line pressure and temperature
-
Analog output signal of the corrected flow rate
-
Displays total and fl ow rate simultaneously