100 Series Instruments
Designed to maintain the rugged performance of the ST-F Series, the Stream 100 range of instruments utilises the common case designs of the ST-F, however provides enhanced software design to enable a greater range of functions and applications.
- Selectable on-screen engineering units; volumetric or mass.
- Ability to process all types of flowmeter signals.
-
Auto backup of all settings.
-
Options for Modbus RS32 or 485
-
Operational temperature -30°C up to +80°C (-22°F up to 178°F)
-
Compact designs for Wall, Panel or Field Mounting Applications
-
Intrinsically Safe - ATEX, IECEx, FM and CSA approval for gas and dust applications.
-
Explosion/fl ame proof II 2 GD EEx d IIB T5.
-
Easy confi guration with clear alphanumerical display.
-
LED backlight option.
-
Loop or battery powered, 8 - 24V AC/DC or 115 - 230V AC power supply.
-
Sensor supply 3.2 / 8.2 / 12 / 24V DC.
Signal input : Flow Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), Active pulse signals, (0)4- 20mA, 0 - 10V DC
F110 - FLOW RATE INDICATOR / TOTALIZER WITH ANALOG AND PULSE SIGNAL OUTPUTS
The F110 is the most popular model in our range
of flow rate / totalizers, complete with pulse
and analog output signals.
Read More >
ST- F111 DUAL INPUT FLOW RATE / TOTALISER WITH TWO PULSE SIGNAL OUTPUTS
The ST-F111 can take two pulse inputs, the flowrate and total of these can be viewed indipendantly with the inputchanel clearly identified on the screen.
Read More >
ST- F113 FLOW RATE MONITOR / TOTALISER WITH HIGH / LOW ALARM, ANALOG &
For flow measurement where continuous flow rate monitoring is important - with re-transmission of the flow rate and/ or totaliser functions or serial communication.
Read More >
ST- F116 DIFFERENTIAL / SUM FLOW COMPUTER WITH ANALOGUE AND PULSE SIGNAL
The ST-F116 flow computer has been developed to calculate differential / consumption or total volume. The pulse and analog outputs do reflect the calculated differential or sum value.
Read More >
ST- F127 Differential / Sum Computer with Temperature Compensation & Analog Outputs
The ST-F127 flow computer has been developed to calculate corrected differential liquid volume at normal conditions
Read More >
ST- F124 Ratio Controller with Analog Ouput & High / Low Alarms
The ST-F124 ratio controller has been designed to ensure that two flows are kept at the same ratio even with changing flow rates.
Read More >
ST-F126EG Flow Computer with Temperature & Pressure Compensation +Analog Output For Gas Correction
The ST-F126-EG flow computer has been developed to calculate corrected gas volume at normal conditions.
Read More >
ST- F133 Dispenser Controller with Pump Start & Valve Control
The ST-F133 is especially designed for the controlled delivery of varying batch quantities.
Read More >